Inversor solar aislado de onda sinusoidal pura serie LF de 5KW 8KW 10KW
LF Series Off-Grid Solar Inverter Multi-Angle Product Views
LF Series Pure Sine Wave Inverter with LCD Display and Smart Monitoring
LF Series Off-Grid Solar Inverter for Home Backup Power System Diagram
LF Series Low Frequency Solar Inverter Internal Transformer and Components
Inversor solar aislado de onda sinusoidal pura serie LF de 5KW 8KW 10KW
LF Series Off-Grid Solar Inverter Multi-Angle Product Views
LF Series Pure Sine Wave Inverter with LCD Display and Smart Monitoring
LF Series Off-Grid Solar Inverter for Home Backup Power System Diagram
LF Series Low Frequency Solar Inverter Internal Transformer and Components

Compartir

Fabricante de inversor solar fuera de red de onda sinusoidal pura de la serie LF de 5KW, 8KW y 10KW

LF Series 5KW/8KW/10KW Off-Grid Inverters are designed to provide stable and reliable power for residential, commercial, and remote energy applications. Supporting solar panels, battery storage, and generator integration, these inverters offer efficient energy conversion, intelligent power management, and strong load adaptability. With pure sine wave output and off-grid capability, the LF Series is ideal for backup power systems, rural electrification, and independent solar energy solutions.

Rango de potencia:

 5KW / 8KW / 10KW

Battery Voltage:

 48 VCC

Battery model output voltage:

 220VAC±10% (custom 110VAC±10%)

AC Input voltage:

 220VAC(standard)
DescargarAveriguar

Nota: Por favor, lea el manual de seguridad e instalación antes de utilizar el producto. Nos reservamos el derecho de interpretación final.

Las especificaciones de esta hoja de datos están sujetas a cambios sin previo aviso.

Características

  • Pure sine wave output
  • Automatically send signal to start generator
  • Can support WIFI/GPRS
  • High efficiency design for optimized battery performance
  • MPPT efficiency max 98%
  • Selectable charging current based on applications
  • BMS function for lithium battery
  • AC start-up voltage auto restart voltage
  • DC start & automatic self-diagnostic fuction
  • lead acid battery/Lithium battery

Parámetros básicos

ModeloLF Series 5KWLF Series 8KWLF Series 10KW
AC Input voltage220VAC(standard)
Input voltage range154-264VAC+3V(Nor Model)/185-264VAC+3V(UPS model) 110V model: 77-132VAC=3V (Nor Model) 92-132VAC+3V (UPS model)
Input frequency50/60Hz±5%
Output power5000W8000W10000W
AC model output VoltageThe output voltage under the mains is the same as the input voltage
AC model output frequencyThe output frequency under the mains is the same as the input frequency
Battery model output voltage220VAC±10% (custom 110VAC±10%)
Battery model output frequency50Hz or 60Hz±1%
Battery model output wavePure sine wave
Tipo de bateríaExternal lead-acid battery, Gel battery, water battery or Lithium battery
Battery voltage48 VCC
Battery charging voltage54.8VDC
Maximum PV array power48V: 6400W
Solar input voltage range12V MPPT 15V-105VDC 24V MPPT 30V-150VDC 48V: MPPT 60V-150VDC
Maximum PV Display Open Circuit Voltage12V: PWM 50VDC 24V: MPPT 150VDC 48V: MPPT 150VDC
Maximum solar charging current120A
Maximum AC Charge Current52A83A104A
Transfer time≤10ms (UPS model) / ≤20ms (INV mode)
load peak ratio(MAX) 3:1
Protective functionUnder mains: Input overcurrent fuse
Under inverter: Overload protection, short circuit protection, low voltage protection, (with battery anti-reverse connection board)
Protective functionYou can view parameters such as AC voltage, AC frequency, PV voltage, PV current, output voltage, output frequency, battery voltage, load current and other parameters by turning the page keys.
Voice promptLow battery protection buzzer long beep
Low battery buzzer beeps every second
Overload buzzer beeps
When the overload is less than 130%, the buzzer will sound every second, and the output will be turned off after 30s. When the overload is greater than 150%, the output will be turned off after 300ms.
Operating temperature-10℃~50℃
Storage temperature-15℃~45℃
Humedad relativa-10℃~90℃ no condensation
Ruido<45dB

1. ¿Cuál es la diferencia entre los modelos de 5KW, 8KW y 10KW?

La diferencia principal es la capacidad de salida. El modelo de 5KW es adecuado para pequeños sistemas residenciales, el modelo de 8KW se adapta a hogares medianos o pequeños negocios, mientras que el modelo de 10KW está diseñado para hogares más grandes o sistemas aislados de mayor demanda energética.

2. ¿Cuántos electrodomésticos puede soportar un inversor de 5KW / 8KW / 10KW?

Depende de la carga total. Un inversor de 5 kW puede hacer funcionar electrodomésticos básicos, un sistema de 8 kW puede admitir más electrodomésticos, incluidas bombas o aires acondicionados, mientras que un inversor de 10 kW puede manejar múltiples dispositivos de alta potencia simultáneamente.

3. ¿Qué tamaño de inversor es mejor para uso doméstico?

Para la mayoría de los usuarios residenciales, 5 kW son adecuados para las necesidades energéticas básicas, 8 kW son ideales para hogares de tamaño mediano con mayor consumo y se recomiendan 10 kW para hogares grandes o para vivir completamente fuera de la red.

4. ¿Admiten los tres modelos el mismo sistema de batería?

Yes, LF Series 5KW, 8KW, and 10KW inverters typically use 48V battery systems and are compatible with lithium and lead-acid batteries, depending on system configuration.

5. Does the LF Series inverter support generator connection?

Yes. These inverters can work together with generators to provide stable backup power and continuous energy supply during low solar generation periods.

Productos relacionados